Chose the optimum welding gas for your application with our selection tool.
Looking for a welding gas to drive both productivity and profit as well as ensuring weld quality? Use our easy gas selector tool. Alternatively, for general enquiries or to receive a quote for larger volumes call us on 0800 3890202 or fill in the contact form here.
Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.
M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.
M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.
Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.
M20ArC10 weld process gas meeting the requirements of ISO14175:M20, contains 10% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.
M20ArC13 weld process gas meeting the requirements of ISO14175:M20, contains 13% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.
Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.
Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.
M20ArC10 weld process gas meeting the requirements of ISO14175:M20, contains 10% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.
M20ArC13 weld process gas meeting the requirements of ISO14175:M20, contains 13% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.
M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.
M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.
M20ArC13 weld process gas meeting the requirements of ISO14175:M20, contains 13% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.
M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.
Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.
M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.
M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.
Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.
M20ArC10 weld process gas meeting the requirements of ISO14175:M20, contains 10% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.
M20ArC13 weld process gas meeting the requirements of ISO14175:M20, contains 13% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.
M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.
Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.
Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.
M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.
M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.
Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.
M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.
Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.
Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.
M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.
M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.
Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.
Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.
Inolinx® MAG weld process gas meeting the requirements of ISO14175:M11, contains 2% Carbon Dioxide and 1% Hydrogen in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.
M12ArC2 weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.
M12ArC1.5 weld process gas meeting the requirements of ISO14175:M12, contains 1.5% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.
N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.
Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
M12ArC2 weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.
M12ArC1.5 weld process gas meeting the requirements of ISO14175:M12, contains 1.5% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.
M13ArO1 weld process gas meeting the requirements of ISO14175:M13, contains 1% Oxygen in Argon. Suited for MAG welding of stainless steels.
N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.
Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
M12ArC2 weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.
M12ArC1.5 weld process gas meeting the requirements of ISO14175:M12, contains 1.5% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.
M13ArO1 weld process gas meeting the requirements of ISO14175:M13, contains 1% Oxygen in Argon. Suited for MAG welding of stainless steels.
N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.
Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.
Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
N2ArN2 weld process gas meeting the requirements of ISO14175:N2, contains 2% Nitrogen in Argon. Used for N2 (classification) TIG & MAG welding of duplex stainless steel.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.
Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.
Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.
I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.
Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.
I3HeAr5 weld process gas meeting