Animated loader dots14ComingSoonAnimated loader dots
Pipe being TIG welded
Automotive| Welding and Cutting

Welding

Improved productivity, fewer rejects and a better working environment

Linx® weld process (shielding) gases are a unique range of gases, delivering the best combination of quality, productivity and safety.

The Linx® range has been designed following rigorous testing under real working conditions.

Linx® gases deliver the highest levels of performance - including better weld quality and faster welding speeds - to maximise productivity, reduce rejects and improve your working environment. Achieve more with fewer rejects when welding carbon steel, stainless steel, aluminium or high-performance alloys.

What Gases are Available in Air Products' Linx® Range?​

Inolinx® gases range

Maximum performance for welding stainless steel

Ferrolinx® gases range

For faster, cleaner welding of carbon steel

Alulinx® gases range

One gas that works for all aluminium welding

Metals / Weld Process / Offerings

Find your optimal welding gas

Looking for a welding gas to drive both productivity and profit as well as ensuring weld quality? Use our easy gas selector tool. Alternatively, for general enquiries or to receive a quote for larger volumes call us on 0800 3890202 or fill in the contact form here.

Find your optimal welding gas

Our best gas

Alulinx Standard

Ferrolinx® U

Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We also recommend

M20ArC15

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Alumaxx Plus Standard

M21ArC20

M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

M20ArC15

M21ArC25

M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

used in certain applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alulinx Standard

Ferrolinx® F

Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

We Also Recommend

Alulinx Standard

Ferrolinx® U

Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

M20ArC15

M20ArC10

M20ArC10 weld process gas meeting the requirements of ISO14175:M20, contains 10% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.

M20ArC15

M20ArC13

M20ArC13 weld process gas meeting the requirements of ISO14175:M20, contains 13% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alulinx Standard

Ferrolinx® U

Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alulinx Standard

Ferrolinx® F

Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Also Suitable

M20ArC15

M20ArC10

M20ArC10 weld process gas meeting the requirements of ISO14175:M20, contains 10% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.

M20ArC15

M20ArC13

M20ArC13 weld process gas meeting the requirements of ISO14175:M20, contains 13% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.

M20ArC15

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Alumaxx Plus Standard

M21ArC20

M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

M20ArC15

M21ArC25

M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alulinx Standard

Ferrolinx® U

Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

M20ArC15

M20ArC13

M20ArC13 weld process gas meeting the requirements of ISO14175:M20, contains 13% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.

M20ArC15

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Alumaxx Plus Standard

M21ArC20

M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

M20ArC15

M21ArC25

M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alulinx Standard

Ferrolinx® U

Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

M20ArC15

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Alumaxx Plus Standard

M21ArC20

M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

M20ArC15

M21ArC25

M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alulinx Standard

Ferrolinx® F

Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

We Also Recommend

Alulinx Standard

Ferrolinx® U

Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

M20ArC15

M20ArC10

M20ArC10 weld process gas meeting the requirements of ISO14175:M20, contains 10% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.

M20ArC15

M20ArC13

M20ArC13 weld process gas meeting the requirements of ISO14175:M20, contains 13% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for spray transfer modes.

M20ArC15

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Alumaxx Plus Standard

M21ArC20

M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

M20ArC15

M21ArC25

M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alulinx Standard

Ferrolinx® U

Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alulinx Standard

Ferrolinx® F

Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Also Suitable

M20ArC15

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Alumaxx Plus Standard

M21ArC20

M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

M20ArC15

M21ArC25

M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alulinx Standard

Ferrolinx® U

Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alulinx Standard

Ferrolinx® F

Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Also Suitable

M20ArC15

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Alumaxx Plus Standard

M21ArC20

M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

M20ArC15

M21ArC25

M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alulinx Standard

Ferrolinx® U

Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alulinx Standard

Ferrolinx® F

Ferrolinx® F weld process gas meeting the requirements of ISO14175:M14, contains 5% Carbon Dioxide and 2% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Also Suitable

M20ArC15

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Alumaxx Plus Standard

M21ArC20

M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

M20ArC15

M21ArC25

M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

We Also Recommend

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

Also Suitable

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Backing Gas - Our Best Gas

N5 R1 Standard

N5NH5

N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.

Backing Gas-Also Suitable

Inolinx

Inolinx® TIG

Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

Nitrogen Standard

Nitrogen

Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Also Suitable

M20ArC15

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Alumaxx Plus Standard

M21ArC20

M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

M20ArC15

M21ArC25

M21ArC25 weld process gas meeting the requirements of ISO14175:M25, contains 25% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

used in certain applications

Alulinx Standard

Ferrolinx® U

Ferrolinx® U weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our best gas

Inolinx

Inolinx® MAG

Inolinx® MAG weld process gas meeting the requirements of ISO14175:M11, contains 2% Carbon Dioxide and 1% Hydrogen in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.

We also recommend

Alumaxx Plus Standard

M12ArC2

M12ArC2 weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.

also suitable

M20ArC15

M12ArC1.5

M12ArC1.5 weld process gas meeting the requirements of ISO14175:M12, contains 1.5% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.

Backing Gas - Our Best Gas

N5 R1 Standard

N5NH5

N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.

Backing Gas - Also Suitable

Inolinx

Inolinx® TIG

Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

Nitrogen Standard

Nitrogen

Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our best gas

Alumaxx Plus Standard

M12ArC2

M12ArC2 weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.

also suitable

M20ArC15

M12ArC1.5

M12ArC1.5 weld process gas meeting the requirements of ISO14175:M12, contains 1.5% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.

Used in Certain Applications

M20ArC15

M13ArO1

M13ArO1 weld process gas meeting the requirements of ISO14175:M13, contains 1% Oxygen in Argon. Suited for MAG welding of stainless steels.

Backing Gas - Our Best Gas

N5 R1 Standard

N5NH5

N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.

Backing Gas - Also Suitable

Inolinx

Inolinx® TIG

Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

Nitrogen Standard

Nitrogen

Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our best gas

Alumaxx Plus Standard

M12ArC2

M12ArC2 weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.

also suitable

M20ArC15

M12ArC1.5

M12ArC1.5 weld process gas meeting the requirements of ISO14175:M12, contains 1.5% Carbon Dioxide in Argon. Suited for MAG welding of stainless steels.

Used in Certain Applications

M20ArC15

M13ArO1

M13ArO1 weld process gas meeting the requirements of ISO14175:M13, contains 1% Oxygen in Argon. Suited for MAG welding of stainless steels.

Backing Gas - Our Best Gas

N5 R1 Standard

N5NH5

N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.

Backing Gas - Also Suitable

Inolinx

Inolinx® TIG

Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

Nitrogen Standard

Nitrogen

Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our best gas

Inolinx

Inolinx® TIG

Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

We also recommend

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

also suitable

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Backing Gas - Our Best Gas

N5 R1 Standard

N5NH5

N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.

Backing Gas - Also Suitable

Inolinx

Inolinx® TIG

Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

Nitrogen Standard

Nitrogen

Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our best gas

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We also recommend

Alumaxx Plus Standard

N2ArN2

N2ArN2 weld process gas meeting the requirements of ISO14175:N2, contains 2% Nitrogen in Argon. Used for N2 (classification) TIG & MAG welding of duplex stainless steel.

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

also suitable

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Backing Gas - Our Best Gas

N5 R1 Standard

N5NH5

N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.

Backing Gas - Also Suitable

Inolinx

Inolinx® TIG

Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

Nitrogen Standard

Nitrogen

Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our best gas

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We also recommend

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

also suitable

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Backing Gas - Our Best Gas

N5 R1 Standard

N5NH5

N5NH5 weld process gas meeting the requirements of ISO14175:N5, contains 5% Hydrogen in Nitrogen. Used for purging and backing of welds in stainless steel.

Backing Gas - Also Suitable

Inolinx

Inolinx® TIG

Inolinx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

Nitrogen Standard

Nitrogen

Nitrogen Technical grade 4.8 (99.998%) meets the requirements for ISO14175:N1. It is typically used for purging, blanketing and inerting in welding processes.

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our Best Gas

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We Also Recommend

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

Also Suitable

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our Best Gas

Alulinx Standard

Alulinx®

Alulinx® weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We Also Recommend

Argon Standard

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.

Also Suitable

Alumaxx Plus Standard

I3HeAr5

I3HeAr5 weld process gas meeting the requirements of ISO14175:I3, contains 5% Argon in Helium. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe15

I3ArHe15 weld process gas meeting the requirements of ISO14175:I3, contains 15% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe25

I3ArHe25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Helium in Argon. Used for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% H